Filter products
CC
Cam
Cylinders
Valves
Trans
Model
Product Type
Description
Engine Code
Brands
Position
Your vehicle details
Make: Nissan
Model: Navara
Engine: 2.5
Year: 2011
Fuel: diesel
Please note this is for guidance only
Delphi Ball Joint (Front)
TC2147
Out Of Stock
DELPHI LOWER BALL JOINT
This Delphi Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Length mm | 60 |
| Width mm | 60 |
| Height mm | 85 |
| Thread Note | Pinch Bolt 22mm |
DELPHI LOWER BALL JOINT
£18.42
£15.35
new
Out Of Stock
DELPHI LINK STABILISER
This Delphi Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Type | Coupling Rod |
| Length mm | 65 |
| Width mm | 69 |
| Height mm | 65 |
| Thread Note | M12x1.25 |
| Thread Note 2 | M12x1.25 |
DELPHI LINK STABILISER
£15.62
£13.02
new
Out Of Stock
DELPHI LINK STABILISER
This Delphi Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Stabiliser Rod/Strut |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Type | Coupling Rod |
| Length mm | 65 |
| Width mm | 69 |
| Height mm | 65 |
| Thread Note | M12x1.25 |
| Thread Note 2 | M12x1.25 |
DELPHI LINK STABILISER
£15.62
£13.02
new
Out Of Stock
DELPHI TIE ROD END
This Delphi Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Length mm | 203 |
| Width mm | 45 |
| Height mm | 84 |
| Thread Note | M16x1.5 |
| Cone Size mm | 15 |
DELPHI TIE ROD END
£18.13
£15.11
new
Out Of Stock
DELPHI TIE ROD END
This Delphi Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Length mm | 203 |
| Width mm | 45 |
| Height mm | 84 |
| Thread Note | M16x1.5 |
| Cone Size mm | 15 |
DELPHI TIE ROD END
£18.13
£15.11
new
Out Of Stock
DELPHI INNER TIE ROD
This Delphi Tie Rod fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod Axle Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Length mm | 220 |
| Width mm | 40 |
| Height mm | 40 |
| Axle Joint Length mm | 202 |
| Thread Note 2 | M16x1.5 |
DELPHI INNER TIE ROD
£17.45
£14.54
new
Out Of Stock
DELPHI COMPLETE LOWER WISHBONE
This Delphi Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Track Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Note | Lower, Outer, With heavy duty suspension |
| Part Detail | with ball joint |
| Type | Control Arm |
| Length mm | 480 |
| Width mm | 400 |
| Height mm | 115 |
| Material Type | Sheet Steel |
DELPHI COMPLETE LOWER WISHBONE
£122.95
£102.46
new
Out Of Stock
DELPHI COMPLETE UPPER WISHBONE
This Delphi Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Track Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Note | Outer, Upper |
| Part Detail | with ball joint |
| Type | Control Arm |
| Length mm | 337 |
| Width mm | 265 |
| Height mm | 91 |
| Material Type | Sheet Steel |
DELPHI COMPLETE UPPER WISHBONE
£73.21
£61.01
new
Out Of Stock
DELPHI COMPLETE LOWER WISHBONE
This Delphi Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Track Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Note | Lower, Outer, With heavy duty suspension |
| Part Detail | with ball joint |
| Type | Control Arm |
| Length mm | 480 |
| Width mm | 400 |
| Height mm | 115 |
| Material Type | Sheet Steel |
DELPHI COMPLETE LOWER WISHBONE
£122.95
£102.46
new
Out Of Stock
DELPHI COMPLETE UPPER WISHBONE
This Delphi Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Track Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Note | Outer, Upper |
| Part Detail | with ball joint |
| Type | Control Arm |
| Length mm | 337 |
| Width mm | 265 |
| Height mm | 91 |
| Material Type | Sheet Steel |
DELPHI COMPLETE UPPER WISHBONE
£73.21
£61.01
new
Out Of Stock
BALL JOINT (LH/RH)
This Fahren Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Position | Front Axle, Left or Right |
| Specification | Push fit |
| Type | Control Arm |
BALL JOINT (LH/RH)
£18.60
£15.50
new
Out Of Stock
BALL JOINT (INC FIT)
This Fahren Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Detail | Supplied with circlip |
| Fitment | Upper |
| Position | Front Axle, Left or Right |
| Specification | push fit |
| Thread Note | Thread: M14x1.5 |
| Type | Control Arm |
BALL JOINT (INC FIT)
£21.91
£18.26
new
Out Of Stock
STABILISER LINK (FRONT LH)
This Fahren Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Stabiliser Link |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Length mm | Length [mm]: 65 |
| Part Detail | Bar/Strut: Coupling Rod |
| Position | Front Axle, Left |
| Sizes | Thread Size 2: M12X1.25 |
| Thread Note | Thread: M12X1.25 |
STABILISER LINK (FRONT LH)
£14.36
£11.97
new
Out Of Stock
STABILISER LINK (RH)
This Fahren Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Stabiliser Link |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Length mm | Length [mm]: 65 |
| Part Detail | Bar/Strut: Coupling Rod |
| Position | Front Axle, Right |
| Sizes | Thread Size 2: M12X1.25 |
| Thread Note | Thread: M12X1.25 |
STABILISER LINK (RH)
£14.36
£11.97
new
Out Of Stock
TIE ROD END (LH)
This Fahren Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Outer |
| Position | Front Axle, Left |
| Thread Note | Thread: M16x1.5, with internal thread, RHT |
TIE ROD END (LH)
£18.25
£15.21
new
Out Of Stock
TIE ROD END (RH)
This Fahren Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Outer |
| Position | Front Axle, Right |
| Thread Note | Thread: M16x1.5, with internal thread, RHT |
TIE ROD END (RH)
£18.25
£15.21
new
Out Of Stock
WISHBONE (RH)
This Fahren Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Position | Front Axle, Right |
| Type | Control Arm |
WISHBONE (RH)
£123.92
£103.27
new
Out Of Stock
FIRSTLINE BALL JOINT (UPPER LH/RH)
This First Line Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Thread Size mm | Thread Meas 1.: M14x1.5 |
| Fitment | Upper |
| Size mm | Bore Dia.: 42.1;Bore Dia.1: 14.7;Bore Dia.2: 18 |
| Part Detail | Mounting Type: Pressed |
| Vehicle Detail | Steering Arm Type.: For control arm;Vers.: Fitting Kit |
FIRSTLINE BALL JOINT (UPPER LH/RH)
£26.87
£22.39
new
Out Of Stock
FIRSTLINE BALL JOINT L/R
This First Line Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Size mm | Bore Dia.: 22;Bore Dia.1: 45.1 |
| Part Detail | Mounting Type: Pressed |
| Vehicle Detail | Steering Arm Type.: For control arm;Vers.: Fitting Kit |
FIRSTLINE BALL JOINT L/R
£25.15
£20.96
new
Out Of Stock
FIRSTLINE STABILISER LINK LH
This First Line Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Stabiliser Link |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Thread Size mm | Thread Size: M12X1.25;Thread Size 2: M12X1.25 |
| Length mm | L.: 65 |
| Part Detail | Coupling Rod;Paired Article No.: FDL6986 |
FIRSTLINE STABILISER LINK LH
£21.36
£17.80
new
Out Of Stock
FIRSTLINE STABILISER LINK RH
This First Line Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Stabiliser Link |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Thread Size mm | Thread Size: M12X1.25;Thread Size 2: M12X1.25 |
| Length mm | L.: 65 |
| Part Detail | Coupling Rod;Paired Article No.: FDL6985 |
FIRSTLINE STABILISER LINK RH
£21.36
£17.80
new
Out Of Stock
FIRSTLINE TIE ROD END (OUTER LH)
This First Line Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Thread Size mm | Thread Meas 1.: M16x1.5 |
| Fitment | Outer |
| Part Detail | RHT female thread;Paired Article No.: FTR5420 |
FIRSTLINE TIE ROD END (OUTER LH)
£23.81
£19.84
new
Out Of Stock
FIRSTLINE TIE ROD END OUTER RH
This First Line Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Thread Size mm | Thread Meas 1.: M16x1.5 |
| Fitment | Outer |
| Part Detail | RHT female thread;Paired Article No.: FTR5419 |
FIRSTLINE TIE ROD END OUTER RH
£23.81
£19.84
new
First Line Tie Rod (Front)
FTR5379
Out Of Stock
FIRSTLINE RACK END (LH/RH)
This First Line Tie Rod fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Rack End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Thread Size mm | Thread Meas 1.: M20X1.0;Thread Meas 2.: M16x1.5 |
| Length mm | L.: 220 |
| Size mm | Axle Joint L.: 220 |
| Note | Axle Jt. Thread Type: with external thread |
FIRSTLINE RACK END (LH/RH)
£23.16
£19.30
new
Out Of Stock
FIRSTLINE SUSPENSION ARM LH
This First Line Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Suspension Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Upper |
| Part Detail | Paired Article No.: FCA6725 |
| Vehicle Detail | Steering Arm Type.: Control Arm |
FIRSTLINE SUSPENSION ARM LH
£94.02
£78.35
new
Out Of Stock
FIRSTLINE TRACK CONTROL ARM (LOWER LH)
This First Line Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Suspension Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Part Detail | Paired Article No.: FCA6727 |
| Vehicle Detail | Steering Arm Type.: Control Arm |
FIRSTLINE TRACK CONTROL ARM (LOWER LH)
£167.59
£139.66
new
Out Of Stock
FIRSTLINE TRACK CONTROL ARM (LOWER RH)
This First Line Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Suspension Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Part Detail | Paired Article No.: FCA6726 |
| Vehicle Detail | Steering Arm Type.: Control Arm |
FIRSTLINE TRACK CONTROL ARM (LOWER RH)
£167.59
£139.66
new
Out Of Stock
FIRSTLINE SUSPENSION ARM RH
This First Line Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Suspension Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Upper |
| Part Detail | Paired Article No.: FCA6724 |
| Vehicle Detail | Steering Arm Type.: Control Arm |
FIRSTLINE SUSPENSION ARM RH
£94.02
£78.35
new
Out Of Stock
KEYPARTS BALL JOINT L/R
This Key Parts Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Size mm | Bore Dia.: 22;Bore Dia.1: 45.1 |
| Part Detail | Mounting Type: Pressed |
| Vehicle Detail | Steering Arm Type.: For control arm;Vers.: Fitting Kit |
KEYPARTS BALL JOINT L/R
£17.52
£14.60
new
Out Of Stock
NAPA BALL JOINT (INC FIT)
This NAPA Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Upper |
| Part Detail | for control arm;Mount. Type: Pressed |
| Size mm | Thread Size 1: M14 x 1.5 |
NAPA BALL JOINT (INC FIT)
£26.78
£22.32
new
Out Of Stock
NAPA BALL JOINT (LH/RH)
This NAPA Ball Joint fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Ball Joint |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Part Detail | for control arm;Mount. Type: Pressed |
NAPA BALL JOINT (LH/RH)
£18.06
£15.05
new
Out Of Stock
NAPA STABILISER LINK (FRONT LH)
This NAPA Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Rod/Strut, stabiliser |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Detail | Coupling Rod |
| Size mm | Length: 65;Thread Size: M12X1.25 |
NAPA STABILISER LINK (FRONT LH)
£15.34
£12.78
new
Out Of Stock
NAPA STABILISER LINK (RH)
This NAPA Stabiliser Link fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Rod/Strut, stabiliser |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Part Detail | Coupling Rod |
| Size mm | Length: 65;Thread Size: M12X1.25 |
NAPA STABILISER LINK (RH)
£15.34
£12.78
new
Out Of Stock
NAPA TIE ROD END (LH)
This NAPA Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Outer |
| Size mm | Thread Size: M16X1.5 |
| Part Note | With internal thread |
NAPA TIE ROD END (LH)
£17.12
£14.27
new
Out Of Stock
NAPA TIE ROD END (RH)
This NAPA Tie Rod End fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Tie Rod End |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Outer |
| Size mm | Thread Size: M16X1.5 |
| Part Note | With internal thread |
NAPA TIE ROD END (RH)
£17.12
£14.27
new
Out Of Stock
NAPA AXIAL JOINT (RACK END)
This NAPA Tie Rod fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Inner Tie Rod |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Size mm | Axle Joint L.: 220;Thread Size: M16X1.5;Thread Size 1: M20 x 1.0 |
NAPA AXIAL JOINT (RACK END)
£16.63
£13.86
new
Out Of Stock
NAPA WISHBONE (LH)
This NAPA Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Track Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Part Detail | Control Arm |
NAPA WISHBONE (LH)
£120.25
£100.21
new
Out Of Stock
NAPA WISHBONE (RH)
This NAPA Track Control Arm fits the following vehicles
- Navara 2.5 D40 03/10-12/16
| Description | Track Control Arm |
|---|---|
| Engine Code | YD25DDTI |
| BHP | 188 |
| Fitment | Lower |
| Part Detail | Control Arm |
NAPA WISHBONE (RH)
£120.25
£100.21
new
Steering & Susp. Components
orangespanner will have the right suspension parts for your Nissan Navara. Enter your registration number on the home page to find parts for your car.
If your ball joint dust cover is split preventing an ingress of dirt, you will probably need a ball joint, track rod end or suspension arm wishbone.